Description

In typical Nerd fashion, these are some of the most functionally intelligent links on the market. You will not find a more economically priced links with this many features. These are meant to fit a wide variety of chassis with little or no modification, though I cannot guarantee fitment with each kit. These should be made to work with most chassis that allow front and rear upper link mounting directly to the frame. The rears can be outboarded or inboarded, though you may need to bend the fronts of the rear uppers slightly depending on the chassis. This is easily done with a pair of pliers.

The front links are straight brass bars. Bent front links are inferior to straight links for performance as they can hang up easier on obstacles before you clear the front of the skid. These deadbolt fronts links are 13g and the C10/Gladiator/JLU/Basecamp links are 16g. The rear links are double bend titanium and are designed to raise your clearance after the skid all the way to the rear drive shaft. This helps to reduce snags on obstacles. The deadbolt rears are 5g and the Gladiator rears are approximately 6g. This combination helps to provide more forward bias naturally, keeping overall weight down and thus increasing performance. Currently I am not offering C10/Basecamp/JLU rear links. If are running one of the aforementioned geometries, and you would like a short wheelbase with these links, you can swap to deadbolt with just these links and a regular deadbolt driveshaft kit.

There are 4 link combinations:

Deadbolt- 41mm front links and 68.5mm rear links- 133.5mm wheelbase

Gladiator- 50.5mm front links and 79mm rear links- 155mm wheelbase

Cbolt- 50.5mm front links and 68.5mm rear links- 145mm wheelbase

Deadiator- 41mm front links and 79mm rear links – 145mm wheelbase

**Note: In all sets, rear links will come as unpolished titanium . The picture of the rear links mounted to the gizmo shows you what the finish looks like. If you want a polish or anodization done to the rear links as also pictured above. Please go to the link polish and anodization page to select your preferred option. Either option is only 9.99!**